Register

DOORS

Solidcarve PSC 4

Solidcarve PSC 4 Click Here For Solidcarve PSC 4
Glass Options
There are no glass options available.

Eye-catching designs that range from contemporary to a hint of the traditional, Solidcarve doors have deep carved patterns on both sides of the door together with square corner routing. Doors with glass options are solid construction; non-glazed doors have CoriTech core. Available in External Primed Skin ready for painting or in select grade veneer for staining.

IMPORTANT INFORMATION:

  • Entrance doors MUST be installed in weather protected openings;
  • You should avoid getting your doors wet, even after finishing/sealing; and
  • NEVER hose your door down.
  • For further information, please refer to Door Care & Maintenance
Construction your selection
Coritech
Solid MDF  
Rout
Routered both faces
Square corner rout
Skin Species/Material
External Primed Skin
Other
Stiles  
Rails (top)  
Rails (bottom)  
For painting
Primed Faces
Weight (average)  

Along with innovation and design, one of the great strengths of Corinthian Doors is our flexibility. Whilst our standard sizing will cater for most homes, Corinthian can also provide doors to those homes that require custom made solutions to fit specific sizing requirements. We really do have a door for everyone.

For the Solidcarve range our standard sizing is listed below.

  • 2040 x 820 x 40
  • 2040 x 870 x 40
  • 2040 x 920 x 40

BAL 12.5

The building requirements for house design and construction vary according to the Bushfire Attack Level (BAL) that a development falls into.

The building requirements for each BAL are set out in Australian Standard: 3959 Construction of buildings in bushfire-prone areas 2009 (AS3959).

This door is available with a rating of BAL 12.5 and must be specified at the time of order.

*Desert Sand, Obscure and Slumped Waterfall glazing options are not available for BAL 12.5 construction.

X