-
Primed BAL40 Collection
Introducing the Primed BAL40 Collection
The Australian lifestyle is beyond compare. Many of our homes are surrounded by pristine natural beauty—even in the suburbs—and designed to complement the unique aesthetic of our land. Unfortunately, bushfires can be part of this experience and need to be considered when you build or renovate. Bushfire Attack Levels (also known as BALs) are a series of Australian Standards that outline different construction practices and building materials for five bushfire hazard levels. They are:
- BAL 12.5: Low
- BAL 19: Moderate
- BAL 29: High
- BAL 40: Very high
- BAL FZ: Flame zone
The Primed BAL 40 Rural Collection is manufactured to meet the regulatory requirements of building to BAL 40 standards. To determine your home's BAL rating, and any special requirements for building in your area, contact your local council, government, or local fire authority.
Collection features
Square corner rout on both faces.
Downloads and information
Customise your Pricelist PDF
Change home
Change door
16 available products
16 available products
-
Remove VBUSHG 101 from My DoorsAdd VBUSHG 101 to My Doors -
Remove VBUSHG 104 from My DoorsAdd VBUSHG 104 to My Doors
-
Remove PBUSH from My DoorsAdd PBUSH to My Doors -
Remove PBUSH 04 from My DoorsAdd PBUSH 04 to My Doors -
Remove PBUSH 1 from My DoorsAdd PBUSH 1 to My Doors -
Remove PBUSH 101 from My DoorsAdd PBUSH 101 to My Doors -
Remove PBUSH 104 from My DoorsAdd PBUSH 104 to My Doors -
Remove PBUSH 2 from My DoorsAdd PBUSH 2 to My Doors -
Remove PBUSH 4 from My DoorsAdd PBUSH 4 to My Doors -
Remove PBUSH 44 from My DoorsAdd PBUSH 44 to My Doors -
Remove PBUSH 9 from My DoorsAdd PBUSH 9 to My Doors -
Remove PBUSHG 101 from My DoorsAdd PBUSHG 101 to My Doors -
Remove PBUSHG 104 from My DoorsAdd PBUSHG 104 to My Doors -
Remove PBUSHG 506 from My DoorsAdd PBUSHG 506 to My Doors -
Remove PBUSHG 513 from My DoorsAdd PBUSHG 513 to My Doors -
Remove PBUSHG 514 from My DoorsAdd PBUSHG 514 to My Doors
Sidelight options
Complete the look with BAL 40 Bushfire Collection sidelights to your entrance frame, either single or double.
BAL 40 Collection specifications
-
Square corner rout on both faces.
-
5mm from top, bottom and each stile.
-
Complies with AS1288:2006 for the selection and installation of glass in buildings. Alternative glass styles are not available. Glass pattern direction is oriented to longest length of glass opening or design direction.
-
Avoid contact with paint, stains, silicone products, grease and grime to the textured side. As Acid Etched glass is an open grain surface these products will damage the etched side.
-
Frames for doors measuring up to 2040 x 920 require a minimum 3 x 100mm square butt hinges.
Frames for doors over and above this size require 4 x 100mm square butt hinges. -
Primed skin, excludes routing, door edges and glazing bead.
-
Light reflective colours should be used on all doors exposed to direct sunlight. Entrance doors must be installed in weather protected openings to reduce the effects of weather exposure. Refer to – Door Care and Maintenance recommendations. Failure to adhere to these recommendations will void warranty.
-
BAL 40 – To obtain BAL 40 certification in accordance with AS1530 – a BAL 40 door, frame, sidelight, hardware and door furniture must all be supplied by Corinthian doors.
-
40-45kg (Based on 2040 x 820 door).
-
5 years – Terms and conditions apply – refer to Warranty and Terms and Conditions of Sale.
-
All BAL 40 doors including value added services applied to doors are Made to Order (MTO). MTO doors and sidelights may only be cancelled on day of ordering. For further information contact Corinthian Customer Service.
-
All sizes are nominal and in millimetres. Door furniture pictured on the doors is sold separately.
All doors depicted are professionally finished. Doors are supplied raw.
